Description
- Dual-Band WiFi 6 (802.11ax)
- 5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
- 2.4 GHz (2x2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
- Operates at full 4x4 MIMO with 160 MHz bandwidth
- 300+ concurrent client capacity
- Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
- Included universal mounting plate, backing plate, and screw kit
Indoor, dual-band WiFi 6 access point that can support over 300 clients with its 5.3 Gbps aggregate throughput rate.
The UniFi6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access point ideal for home and office use. The U6 Pro is capable of reaching an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MU-MIMO and OFDMA) bands, which allows it to support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. It can also isolate your guest traffic to ensure optimal security and speed. The U6 Pro also operates at full 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. It can be set up in minutes and fully managed with the UniFi Network application*.
The UniFi6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access point ideal for home and office use. The U6 Pro is capable of reaching an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MU-MIMO and OFDMA) bands, which allows it to support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. It can also isolate your guest traffic to ensure optimal security and speed. The U6 Pro also operates at full 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. It can be set up in minutes and fully managed with the UniFi Network application*.
Mechanical
- Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38")
- Weight
- Without mount: 460 g (1.01 lb)
- With mount: 600 g (1.32 lb)
- Enclosure Material: Plastic
- Mounting Material: SGCC steel
- Weatherproofing: IP54
Hardware
- Management Interfaces: Ethernet / Bluetooth
- Networking Interface: (1) GbE RJ45 port
- Button: Factory Reset
- LED*: White/blue *Due to chip supply shortages, the U6 AP's LED has been limited to only white and blue color modes.
- Power Method: PoE+
- Power supply: UniFi PoE switch / 48V, 0.5A PoE adapter (not included)
- Supported Voltage Range: 44 to 57VDC
- Max. Power Consumption: 13W
- Max. TX power
- 2.4 GHz - 22 dBm
- 5 GHz - 26 dBm
- MIMO
- 2.4 GHz - 2 x 2 (UL MU-MIMO)
- 5 GHz - 4 x 4 (DL/UL MU-MIMO)
- Throughput rate
- 2.4 GHz - 573.5 Mbps
- 5 GHz - 4.8 Gbps
- Antenna gain
- 2.4 GHz - 4 dBi
- 5 GHz - 6 dBi
- Mounting: Wall/Ceiling (included)
- Operating temperatureL -30 to 60° C (-22 to 140° F)
- Operating humidity: 5 - 95% noncondensing
- Certifications: CE, FCC, IC
Software
- WiFi Standards: 802.11a/b/g - WiFi 4/WiFi 5/WiFi 6
- Wireless Security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
- BSSID: 8 Per Radio
- VLAN: 802.1Q
- Advanced QoS: Per-User Rate Limiting
- Guest Traffic Isolation: Supported
- Concurrent clients: 300+
- Zero Wait DFS: Yes* (*Supported with upcoming firmware versions)
Supported Data Rates
- 802.11a - 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b - 1, 2, 5.5, 11 Mbps
- 802.11g - 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n (WiFi 4) - 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
- 802.11ac (WiFi 5) - 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
- 802.11ax (WiFi 6) - 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)