By TP-Link

TP-Link CPE710 5GHz 23dBi Wireless-AC867 Outdoor CPE

SKU: CPE710
MFR#:
CPE710
$89.95
$89.95
CPE710 - Altex Computers & Electronics
$89.95
$89.95
This CPE710 features a powerful 23 dBi professional-grade directional Cassegrain antenna to optimize long-range wireless transmission. SSD technology and flexible installation options, like pole mount kits enabling three-axis alignment, ensure the device withstands windy conditions. Additionally, Pharos Control software offers centralized network management and maintenance from a single PC via an intuitive web-based interface. All of this makes the CPE710 a reliable and cost-effective choice for outdoor wireless applications.
Specifications Hardware Features


Processor: Qualcomm 750MHz CPU, MIPS 74Kc
Memory: 128 MB DDR2 RAM, 16 MB Flash
Interface

1 10/100/1000 Mbps Shielded Ethernet Port (LAN/POE)
1 Reset Button


Power Supply

Passive Power over Ethernet via LAN (+4,5pins; -7,8pins)


Voltage range: 16-27V DC
Dimensions ( W x D x H ): 14.4 x 11.0 x 8.1 in. (366 x 280 x 207 mm)
Antenna Gain: 23 dBi
Antenna Beamwidth: 9° (Azimuth)/7° (Elevation)
Protection

15 KV ESD Protection
6 KV Lightning Protection




Enclosure


Material: Outdoor PC stabilized plastic
Weatherproof: IP65 water and dust proof design


Wireless Features


Wireless Standards: IEEE 802.11a/n/ac
Wireless Speeds

Up to 867 Mbps (80 MHz, Dynamic)
Up to 400 Mbps (40 MHz, Dynamic)
Up to 173.4 Mbps (20 MHz, Dynamic)


Frequency

5.15–5.85 GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.


Transmit Power: Max. 27 dBm (Adjustable power by 1dBm)


Software Features


Network Configuration
WAN: Static/ Dynamic/ PPPoE
LAN: Static/ Dynamic/ DHCP
Forwarding: ALG/ UPnP/ Virtual Server/ Port Trigger
Security:

SPI Firewall/ Ping Forbidden/ DoS Protection
Access Control
Static Routing
Bandwidth Control
IP & MAC Binding


Wireless Configurations

Selectable channel width: 20, 40 or 80MHz
Automatic Wi-Fi channel selection
RF transmit power adjustment in 1 dB step
Dynamic Frequency Selection (DFS)
WDS Enable/ Disable


Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption,
SSID broadcast enable/ disable
Multi-SSID with VLAN tagging in AP mode
Distance/ ACK timeout setting
Wireless MAC address filter
Wireless advanced features:

Beacon interval, RTS threshold, fragmentation threshold, DTIM interval, AP isolation, short GI, Wi-Fi multimedia
Long range point-to-point


Management

Discovery and Remote Management with Pharos Control (Windows)
HTTP/ HTTPS Web-based management
System log
SNMP agent (v2c)
Ping watchdog
Dynamic DNS
SSH server
System Tools    Indicators:Signal Strength, Noise, Transmit CCQ, CPU, and Memory usage


Monitors:

Throughput, Stations, Interfaces, ARP, Routes, WAN, and DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute


Antenna Alignment
System-level Optimizations: Optimized IGMP Snooping / Proxy for multicast applications


PoE Adapter Features


Dimensions(W x D x H)    3.3 x 1.7 x 1.2 in. (85 × 44 × 30 mm)
Interfaces

1 AC Jack with Earth Ground
1× 10/100/1000 Mbps Shielded Ethernet Port (Power + Data)
1× 10/100/1000 Mbps Shielded Ethernet Port (Data)


Button: Remote Reset Button
Power Status LEDs: Green
Input: 100-240VAC, 50/60Hz
Output: 24VDC, 0.5A Max  /  +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Efficiency: > 84.29%
Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark


Others


Certification: CE, FCC, RoHS, IP65


Environment


Operating Temperature: -40℃~70℃ (-40℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing


Package Contents


Outdoor Wireless CPE
24V 0.5A Passive PoE Adapter
Pole Mounting Kits
AC Power Cord
Installation Guide