Description
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 26dBm/200mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
TP-LINK's CPE510 provides cost-effective outdoor wireless networking solutions. It is suitable for point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage applications, making it an ideal choice for both business and home users. Outfitted with Qualcomm Atheros enterprise-level chipsets, high gain antennas, PoE power supply, and specially designed enclosure, this device can operate in almost any climate, ranging from -30℃ (-22℉) to +70 ℃ (158℉). Its dedicated metal reflector ensures high gain, low noise interference, and 15km+ wireless data transmissions. Additionally, its MAXtream TDMA Technology ensures better network performance even when scale increases. The CPE510 also comes with Pharos Control, a centralized management system that facilitates device discovery, status monitoring, firmware upgrades, and network maintenance.
- 5GHz 300Mbps 13dBi Outdoor CPE CPE510
- Built-in 13dBi Dual-polarized Directional Antenna
- AP / Client / AP Router / AP Client Router (WISP) operation modes
- 6KV Lightning Protection
- Weather Proof Enclosure
- 15KV ESD Protection
- Passive PoE Adapter
Hardware Features
- Processor: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
- Memory: 64MB DDR2 RAM, 8MB Flash
- Interface
- 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
- 1 Grounding Terminal
- 1 Reset Button
- Power Supply
- Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
- Voltage range: 16-27VDC
- Power Consumption
- 10.5 Watts Max
- Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
- Dimensions ( W x D x H ): 8.8 x 3.1 x 2.4 in
- Antenna Type
- Built-in 13dBi 2 x 2 Dual-polarized Directional Antenna
- Beam Width: 45° (H-Plane) / 30° (E-Plane)
- Protection
- 15KV ESD Protection
- 6KV Lightning Protection
- Enclosure
- Outdoor ASA stabilized plastic material
- IPX5 waterproof Certification
Wireless Features
- Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
- Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
- Wireless Speeds
- Up to 300Mbps (40MHz,Dynamic)
- Up to 144.4Mbps (20MHz,Dynamic)
- Up to 72.2Mbps (10MHz,Dynamic)
- Up to 36.1Mbps (5MHz,Dynamic)
- Frequency
- 5.15~5.85GHz
- Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
- Transmission Power
- 23dBm/200mw (Adjustable power by 1dBm)
- Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
Software Features
- Wireless Configurations
- Pharos MAXtream TDMA Technology
- 802.11a/n Modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS Enable/Disable
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging (AP mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
- Wireless Advanced:
- > Beacon Interval/RTS Threshold/Fragmentation
- >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
- Management
- Discovery and Remote Management via Pharos Control application
- HTTP/HTTPS Web-based management
- System Log
- SNMP Agent(v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
- System Tools
- Wireless Signal Quality Indicators:
- Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors:
- Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
- System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications / Hardware watch dog
PoE Adapter Features
- Dimensions(W x D x H): 4.3 x 2.2 x 1.3 in
- Interfaces
- 1 AC Jack with Earth Ground
- 1 10/100Mbps Shielded Ethernet Port (Power + Data)
- 1 10/100Mbps Shielded Ethernet Port (Data)
- Button: Remote Reset Button
- Power Status LEDs: Green
- Input: 100-240VAC, 50/60Hz
- Output: 24VDC, 1A Max / +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
- Efficiency: >80%
- Certifications: CE/FCC
Others
- Certification: FCC, RoHS, IPX5
System Requirements
- Google Chrome, Safari, and Firefox browsers for web GUI management
Environment
- Operating Temperature: -30°C~70°C (-22℉~158℉)
- Storage Temperature: -40℃~70℃ (-40℉~158℉)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~95% non-condensing
Package Contents
- Outdoor Wireless CPE
- 24V 1A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide