Tenda TEG1124P-24-250W 24-Port 225W Gigabit Rackmount Ethernet Switch with 24-Port PoE

SKU: TEG1124P-24-250W MFR# TEG1124P-24-250W

Sale price$234.95


  • 6KV Port Lightning Protection
  • 225W with 30W Maximum PoE Power Output
  • Cache Optimization
  • One-Key VLAN

6KV Lightning Protection PoE Switch

is the only engineering switch in real projects, APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged.Tenda TEG11 series switches have professional lightning protection design - 6KV Lightning Protection for Ports and the power,and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture.

CCTV, Standard, VLAN and Isolation Operation Modes Offered

  • Standard: The switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
  • CCTV: The port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.
  • VLAN: Ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively.
  • Isolation: Ports 1 to 12 and ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.

225W PoE Power Supply Simplified Wiring
Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras.
  • Network Standards: IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at
  • LED Indicator
    • 24*Link/Act per device
    • 24*PoE per device
    • 1*Power per device
  • Interfaces: 24*10/100/1000 Base-T ports(Data/Power)
  • Transmission Media: Recommended: CAT5/5e UTP or better
  • Fan Quantity: 1
  • Dimension: 440.0mmx178.0mmx44.0mm
  • Level of Protection
    • Lightning Protection for Ports: 6kV
    • Lightning Protection for Power: 6kV
    • ESD:
    • Air Discharge: ±10kV
    • Contact Discharge: ±8kV
  • Forwarding Mode: Store-and-Forward
  • Switch Capacity: 48 Gbps
  • Packet Forwarding Rate: 35.7Mpps
  • Buffer: 2M
  • MAC Address Table: 8K
  • Jombo Frame: N/A
  • PoE Budget: Single port: AF: 15.4W, AT: 30W  /  Whole device: 225W
  • Power Consumption: /
  • Input Voltage: 100-240V AC 50/60Hz
  • Mounting: Desktop, Wall, and Rack Mounting Supported
  • Operating Temperature: 0℃~45℃
  • Storage Temperature: -40℃~70℃
  • Operating Humidity: 10%~90% non-condensing
  • Storage Humidity: 5%~90% non-condensing
  • Certifications: FCC、CE、RoHS

You may also like

Recently viewed