By Amprobe

Amprobe ACD-10 PLUS 600A Clamp Multimeter

Availability: Low stock: 7 left
SKU: ACD-10 PLUS
MFR#:
ACD-10 PLUS
$127.95
$127.95
Amprobe ACD-10 PLUS 600A Clamp Multimeter
$127.95
$127.95
The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4″/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).

It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.
Specifications What's Included


AC & DC Voltage to 600V
AC Current to 600A
Thin Jaws, only 10mm (0.4”) thick
Resistance to 40MΩ
Included Accessories:   Test leads, battery (installed), soft carrying pouch, users manual


Specifications


AC Voltage: 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current: 40.00 A, 400.0 A, 600 A
Resistance: 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance: 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency: 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Temperature: –
Dual displays: –
Micro Amps: –
Accommodates conductors: up to 1.0″ (25 mm) in diameter
Display: 3-3/4 digits 4000 counts LCD display
Update rate: 3 per second nominal
Polarity: Automatic
Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude: Operating below 2000m; Indoor use
Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery: Below approx. 2.4V
Power supply: 3V coin battery IEC-CR2032
Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function
APO timing: Idle for 30 minutes
APO consumption: 5 µA typical
Jaw opening conductor diameter: max 26 mm
Special features: 30ms Max Hold; Data Hold; Relative Zero mode