By Altex Preferred MFG

Altex Preferred MFG ANT-129-001 4G/LTE/5G Cross-Polarized (MIMO) 7-10 dBi High-Gain Fixed-Mount Outdoor Directional Panel Antenna

SKU: ANT-129-001
MFR#:
ANT-129-001
$129.95
$129.95
ANT - 129 - 001 - Altex Computers & Electronics
$129.95
$129.95
The Altex Preferred MFG ANT-129-001 4G/LTE/5G Cross-Polarized (MIMO) 7-10 dBi High-Gain Fixed-Mount Outdoor Directional Panel Antenna is designed to boost signal strength and data speeds on various cellular networks, including Verizon, AT&T, T-Mobile, Telus, Bell Canada, Rogers, DigiCel, and more. With a dual polarized design and two separately fed cross-polarized ultra wideband directional elements, this antenna can connect to distant cell towers and allow for two simultaneous data streams for greater throughput. It's compatible with MIMO capable routers, modems, and gateways from popular brands like CalAmp, Cisco, Cradlepoint, Digi, Inseego, MoFi, Netgear, and Sierra. The compact, lightweight, and rugged design, along with corrosion-resistant materials, make it suitable for outdoor use in a range of environments. Install it on building rooftops with ease.
Specifications
Frequency Range: 600-960 / 1710-6000MHz Includes all 4G/LTE & Sub-6 5G frequencies used worldwide
Impedance: 50 ohm
Peak Gain: 7 / 10 dBi - Frequency Dependent
Horizontal Beam Width: 70 / 75 degrees
Vertical Beam Width: 75 / 60 degrees
Polarization: Vertical + Horizontal
VSWR: < 2.3
Max Input Power: 50 W
Connector: 2x N Female on 12 in (300 mm) RG58U coax lead
Materials: Ivory ABS / Brass / Aluminum / Stainless Steel - RoHS compliant
Operating Temperature: -40C to +60C
Dimensions: 11.8 x 7.2 x 2.75 in (300 x 183 x 70 mm) excluding mounting bracket
Weight: 1.5 lb (0.62 kg) excluding mounting bracket
Mount: 1.2 - 2.0 inch (30-50 mm) diameter pole (*not included) U-bolts and incline/decline bracket included


 


Mount antenna as high as possible, but keep coax leads as short as possible
Position away from other antennas, lighting fixtures, motors, Low-E or tinted/coated windows, large metal or concrete objects
Do not use a splitter to connect 1 modem port to both antenna jacks
Do not use RG59/RG6 coax (75 Ohm TV cable from the hardware store) – signal will be seriously degraded.  Use low-loss 50 Ohm coax designed for cellular
Weatherseal outdoor connections. Use Silicone Tape
Stand 3+ feet away from antenna when testing
Maximize signal Quality(SINR, RSRQ) 


*Requires 2 Coax Extension Cables