Sold Out
Description
- 4x4 MU-MIMO on 5GHz (1733Mbps max PHY rate), 2x2 MIMO on 2.4GHz (300Mbps max PHY rate)
- 802.3af for base functionality. 802.3at required if using PoE passthrough
- 1x4 (1 in, 4 out) switched Gigabit Ethernet ports with configurable PoE passthrough (port 1 only)
Dual-band, 802.11ac Wave 2 access point with a 2+ Gbps aggregate throughput rate that can be plugged into any non-AC wall outlet.
The Access Point In-Wall HD (UAP IW HD) is a dual-band, 802.11ac WiFi access point that can be plugged into any non-AC wall outlet. The UAP IW HD can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows it to support over 200 concurrently connected clients. This access point is powered by PoE* and is equipped with (5) GbE RJ45 ports, including one for configurable 48V PoE passthrough. The UAP IW HD is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app
The Access Point In-Wall HD (UAP IW HD) is a dual-band, 802.11ac WiFi access point that can be plugged into any non-AC wall outlet. The UAP IW HD can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows it to support over 200 concurrently connected clients. This access point is powered by PoE* and is equipped with (5) GbE RJ45 ports, including one for configurable 48V PoE passthrough. The UAP IW HD is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app
Mechanical
- Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
- Weight: 210 g (7.41 oz)
Hardware
- Networking Interface: (5) 10/100/1000 Ethernet Ports
- Button: Reset
- Power Method: PoE/PoE+
- Supported Voltage Range: 44 to 57VDC
- Power Supply: UniFi Switch (PoE)
- PoE Out: 48V Passthrough (Pins +1, 2; -3, 6)
- Maximum Power Consumption: 11W
- With PoE Passthrough: 23W * Requires PoE+ switch
- Max. TX Power
- 2.4 GHz: 23 dBm
- 5 GHz: 26 dBm
- Dual-Band Antennas
- (2) Single-Port, Single-Polarity Dual-Band Antennas
- 2.4 GHz: 1.8 dBi Each
- 5 GHz: 3.4 dBi Each
- Single-Band Antennas
- (2) Single-Port, Dual-Polarity, Single-Band Antennas
- 5 GHz: 6 dBi Each
- Mounting: 1-Gang Electrical Wall Box (Not Included)
- Operating Temperature: -10 to 60° C (14 to 140° F)
- Operating Humidity: 5 to 95% Noncondensing
- Certifications: CE, FCC, IC
Software
- WiFi Standards: 802.11 a/b/g/n/r/k/v/ac/ac-wave2
- Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF
- BSSID: Up to 8 per Radio
- VLAN: 802.1Q
- Advanced QoS: Per-User Rate Limiting
- Guest Traffic Isolation: Supported
- Power Save: Supported
- Beamforming: Supported
- WMM: Voice, Video, Best Effort, and Background
- Concurrent Clients: 200+
Supported Data Rates (Mbps)
- 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
- 802.11ac
- 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
- 58 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2, VHT 160)